Strength of activated carbon

Welcome to GTR Culture Forums

Welcome to GTR Culture Forums, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information. Take advantage of it immediately, Register Now or Sign In.

Start new topics and reply to others
Subscribe to topics and forums to get automatic updates
Add events to our community calendar
Get your own profile and make new friends
Customize your experience here

Guest Message by DevFuse

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

Strength of activated carbon Dingxinda global quality activated carbon supplier

#1 CLMcar

Advanced Member

Group: Members
Posts: 744
Joined: 07-March 21

Posted 17 September 2021 - 12:49 AM

Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent.
The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions.
The kinetic activity value of adsorbent is the main basis for the design of adsorption system.
The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following steps
(1) External diffusion, the adsorbate from the main air flow through the air film around the particles to the outer surface of the adsorbent; (2) Internal diffusion, the adsorbate from the outer surface through micropores to the surface of the adsorbent micropores
(3) adsorption, the adsorbent reached the microporous surface of the adsorbent is adsorbed
(4) The desorbed adsorbate diffuses to the main body of the gas phase through internal and external diffusionPhysical adsorption process is generally controlled by internal and external diffusion, chemical adsorption is controlled by both surface dynamics and internal and external diffusion.Because of the complexity of the adsorption process and many influencing factors, it is difficult to derive the rate theoretically, so it is generally determined by experience or model experiment.Fir chip as the raw materials, H - POs as activator, using single factor analysis and orthogonal experimental design method, this paper discusses the influence granular activated carbon pore structure and the iodine adsorption value, methylene blue and strength of various preparation factors, determine the optimum process conditions of preparation of granular activated carbon phosphoric acid, phosphoric acid concentration is 70%, dipping 180%, kneading temperature is 170 ℃, for 60 min kneading time, activation temperature is 350 ℃, the activation time of 210 min.
The iodine adsorption value, methylene blue adsorption value, strength and BET specific surface area of GAC were 1020.04mGG, 225mg/g, 88.73% and 1486.48m2/g respectively.
The experimental results show that the impregnation ratio and carbon activation temperature have great effects on the adsorption performance of GAC, while the kneading temperature and impregnation ratio have great effects on the strength of GAC.
Because the strength of GAC decreases with the increase of impregnation ratio, and the decrease range is large, so the preparation of GAC with compound activator is proposed.coal based activated carbon factory[/
The results show that the composite activator can reduce the impregnation ratio of phosphoric acid to wood chips and improve the strength of granular activated carbon.
At the same time, the composite activator can improve the adsorption performance of GAC.
Therefore, granular activated carbon with good adsorption performance and high strength can be prepared by this method.[url=https://www.granular-activated-carbon.com/]https://www.granular...ted-carbon.com/