[xysoom]

ORIGINAL SAW - WOOD CUTTING CROSS CUT SAWS



If you request a quote for this machine, please add a note about your application or needs. We will reply with a request for more information to help determine the best machine for your application.Get more news about Wood Cross Cutting Machine,you can vist our website!

Manual Cross Cut Saws are a new style of cutting. This saw is proudly manufactured in Original Saw's Northern Iowa facility. This saw undeniably brings together efficiency, precision and safety.

Flexible production creates new retail business opportunities,One time to purchase,long life benefit, Don't need to stock up, no inventory
* Fully automatic one-button operation,Any model can be customized on site,Cutting film for phone with Customer customized.Fast customized screen and back Film.
*Bluetooth connection function ,Small machine , Small and does not occupy space,Store front desk can operate,Suitable for retail stores, supermarkets,Distributors, online stores.etc.
This machine is specially designed for felling trees. It is well known that in chopping down trees with an ax, two or three feet, according to the size of the tree, of the most valuable part of the lumber is lost. By this machine the tree is felled within five inches of the ground; and by removing the soil sufficiently to avoid dulling the saw, it can be cut as low as desired. Four men can do the work of ten men with axes in the forests.

It will be recollected that the butt must be squared, or cross-cut, before the log is ready for the mill; but the single operation of felling the tree with this machine leaves the log already squared. The land is left smooth, thus facilitating cultivation, and greatly increasing its value. The surface of the stump being left flat and level, is porous and spongy, so that by the action of moisture and air it soon decays; but when cut by the ax, its pores are sealed up and its surface rendered smooth, and the stump will not soon decay, but remains for years an unsightly and inconvenient object.

This machine, in cross-cutting, operates with equal facility whether the log lies flat on the ground or is elevated several feet above it. To prepare it for cross-cutting, it is turned on one side, and the shaft is put into other bearings, so that the spur-wheel and pinion gear together. The advantage gained over a common cross-cut saw, used by two men, cutting wood into shorter lengths, is that the saw works with greater rapidity, and by having greater power is fed faster.

It can be worked by one or two men, and when not employed in the forests, in sawing up the limbs, it may be used to advantage in cutting all the firewood required in the neighborhood. It is readily adapted to the several kinds of work for which it is intended, requiring less that five minutes for the necessary change of position, and practical experiment has proved its complete success and efficiency.

The power is applied by two cranks, which are sufficiently elevated above the ground to be conveniently worked. The machine is furnished with two handles, by means of which it is easily carried about by two men, and performs its work with great expedition and entire safety. A wedge, of peculiar shape, accompanies each machine, which is driven into the kerf as the saw proceeds, and thus prevents the trees from settling down, or binding the saw, and also forces the tree to fall in the desired direction.

The machine is very simple it its construction, not liable to get out of order, and moderate in cost; and is confidently commended to those interested in forest and timber lands, and all engaged in the lumber business, as effecting a great and important saving of time, labor, and material.