You too can run an FMU setup to increase the fueling capacity of your injectors on a DIY or budget setup. Although you'll need an inline fuel pump, and of course the FMU.
Basically, you plumb the FMU between the existing pump and fuel rail. Then loop the FMU around the inline, so the inlet of the FMU branches off from the fuel line after the inline pump and the return of the FMU branches off just before the inline Wholesale Cigarettes Online.
What happens is, when you increase boost and the FMU clamps down, some of the fuel gets blocked off and thus the inline increases the fuel pressure Cheap Cigarettes Online USA.
Corky Bell also does this for his kits, in a similar fashion but different fashion; everything is done in the engine bay, so this make a simple DIY project to safely fuel a few pounds of boost.
Related Articles:
Cigarette Wholesaler Price
Marlboro Cigarettes Cheap Cigarettes
Newport Cigarettes Coupons
Wholesale Cigarettes Free Shipping
Welcome to GTR Culture Forums
|
|
Guest Message by DevFuse |
Page 1 of 1
Corky Bell also does this for his kits
Page 1 of 1